·       Coil-Over Shock Type:Non-adjustable

· Shock Body Material:Aluminum

· Shock Body Finish:Blue anodized

· Adjustable Valving:No

· Extended Length (in):25.280 in.

· Collapsed Length (in):18.390 in.

· Internal Design:Monotube

· Gas Charged:Yes

· Body Diameter (in):2.500 in.

· Coil-Over Springs Included:Yes

· Spring Finish:Blue powdercoated_11}

· Adjustable Mounting Bracket Included:Yes

2007-2014 King OEM Performance Series Front C/O

$1,480.00Price
Compression Adjuster
  •   Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. 

    ·       High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking. 

    ·       Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body. 

    ·       2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function.

    ·       Coilover shocks are machined with our own truncated thread design for ultimate strength and trouble free spring preload and height adjustments.

    ·       Pinch bolt coil adjuster nut offers superior clamping force to retain your coil preload adjustments without crushing the threads like set screw style collars do.

    ·       The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality. 

    ·       Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing. 

    ·       Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life. 

    ·       High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact.

    ·       Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.

ADDRESS
CONTACT US
STAY IN TOUCH

22551 Shannon Circle

Lake Forest, CA 92630

sales@svcoffroad.com

888-976-5588

  • White Facebook Icon
  • White Instagram Icon

SVCOFFROAD is not affiliated with or endorsed by Ford Motor Company or Toyota, or any other car company mentioned or whose logos are displayed in these web pages or our store. Ford®, Raptor® are trademarks of Ford Motor Company. While we try to keep everything current, pricing is subject to change. All prices are in US Dollars.  Some of these components and or parts are intended for off-road use only and may void Federal or state emissions standards, DOT regulations, local and state traffic regulations, or your private auto insurance policy.  End user assumes all risk with products performance and installation. J.E.T.T. Worx LLc is not responsible for any bodily or mechanical harm, etc. as a result of use or misuse of any products or product installation. Return policy can be found on customer service page.  Note:  It's very important to re-torque all bolts after each off-road session and the first 1,000 miles after install.

2019 by VT Enterprises LLC